メッセージ
折り返しご連絡いたします!
メッセージは20〜3,000文字にする必要があります。
メールを確認してください!
より多くの情報はより良いコミュニケーションを促進します。
正常に送信されました!
折り返しご連絡いたします!
メッセージ
折り返しご連絡いたします!
メッセージは20〜3,000文字にする必要があります。
メールを確認してください!
使用法: | おもちゃの試験装置 | 保証: | 1年 |
---|---|---|---|
製品名: | おもちゃのスクーターの強さのテスター | 適用: | おもちゃおよびおもちゃ材料 |
電源: | 220V 50Hz | 技術: | 専門 |
Gester: | SGSは製造者、TUVを監査した | ||
ハイライト: | EN 71-1のおもちゃの試験装置,170kgは試験装置をもてあそぶ,EN 71-1のスクーターのステアリング管の強さのテスター |
Application: Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. Standards: EN 71-1; ISO 8124-1 |
1.Resistance to downward forces
Place the toy scooter on a horizontal plane and secure it so that it will stand upright during the test.Check that the locking devices are correctly engaged.
A) For toy scooters with two handles, suspend a mass of (50+/-0.5)kg at the centre of each handle. (see Figure 1 a) Maintain the load for 5 min. Determine whether the steering tube collapses and the locking devices are still operable and engaged. Remove the 50kg masses. Release the main locking devices and with the secondary locking device still engaged, load the handles with a mass of (25+/-0.2)kg each and maintain the load for 5 min. Determine whether the secondary locking device is still operable and engaged.
B) For toy scooters with steering tubes without handles, perform the test using a load with a mass of (100+/-1)kg and (50+/-0.5)kg respectively on top of the tube.(see Figure 1 b)
2.Resistance to upward forces
Place and secure the toy scooter upside down on a podium(see Figure 3 c). Check that the locking devices are correctly engaged.
A)For toy scooters with two handles, suspend a mass of (25+/-0.2)kg at the centre of each handle. Maintain the load for 5 min.
B) For toy scooters with steering tubes without handles ,place a mass of (50+/-0.5)kg on the end of the steering tube. Maintain the load for 5 min. Determine whether the steering tube has separated and the locking devices are still operable and engaged.
Model |
GT-M82 |
Loading method |
Cylinder loading |
Control mode |
Touching screen control |
Test load |
(25±0.2)kg (50±0.5)kg (100±1)kg |
Dimension |
1200×1000×1700mm |
Weight |
170kg |
Standards |
ISO 8124-1 section 5.29 |
Optional accessories |
GT-MA12 Air compressor |